Logo MCP gif
Logo MCP

PBX 100 LINEE +39 081 57 34 740

Standards

COMPLIANCE WITH STANDARDS EN124 AND EN1433

Classe A15

 

GROUP 1

Manhole tops and gully tops with loading strength >15kN (Footways)




Classe A15

 

GROUP 2

Manhole tops and gully tops with loading strength >125kN (Footways, pedestrian areas, parking areas)




 

Classe A15

 

GROUP 3

Manhole tops and gully tops with loading strength >250kN (Kerbside channels of roads)




Classe A15

 

GROUP 4

Manhole tops and gully tops with loading strength >D400kN (Carriageways, hard shoulders and parking areas)




 

Classe A15

 

GROUP 5

Manhole tops and gully tops with loading strength >600kN (Docks, harbour areas, aircraft paving)




Classe A15

 

GROUP 6

Manhole tops and gully tops with loading strength > 900kN (aircraft paving)




 

 

Tipica sezione trasversale della strada

 

 

 

 

Norme

 

STANDARD EN 124-2

Gully tops and manhole tops for vehicular and pedestrian areas

 

MARKING: All covers, gratings and frames must bear: A) EN 124-2 (as the marking of the European Standard) B) The appropriate class (e.g. D 400) or the classes for the frames which can be used for several classes (e.g. D400-E600) C) Name and/or trade mark of the producer and the manufacturing place, which may be expressed in code D) The mark of a third party certification body.




 

STANDARD EN 1433

Drainage channels for vehicular pedestrian areas

 

Marking of gratings and covers. Gratings and cover shall be marked as follows A) the number of this standard, EN 1433 (only if all the requirements of this standard are met); B) the appropriate class (e. g. D 400); C) the name and/or identification mark of the manufacturer, of the grating or cover and the place of manufacture wich may be in code; D) the name and/or identification mark of the manufacturer, of the grid unit; E) date of manufacture (coded or not coded); any may be marked with: F) additional markings relating to the intended application of the user; G) the mark of a certification body, when applicable; H) product identification (name and/or catalogue number); Marking of channel bodies. Channel bodies shall be marked as follows: A) the referente to this standard, EN 1433 (only if all the requirements of this standard are met); B) the appropriate class (e. g. D 400); C) the name and/or identification mark of the manufacturer of the channel body, wich may be in code; D) Type of product (Type M or Type I); E) date of manufacture (coded or not coded); F) for channel units with inbuilt gradiente the sequence on each unit; G) marking relating to the grade of weathering resistance for drainage channels made of concrete (N or W, if relevant, + R); and may be marked with: H) additional markings relating to the intended application of the user; I) the mark of a certification body, when applicable; J) product identification (name and/or catalogue number).